If you are in search of how to convert Evenflo car seat to booster, take a look at this article for step-by-step instructions. In this blog post, we’ll take you through how to remove your toddler’s harness and how to set up the new booster seat.
Step 1. Make sure that your child’s shoulders are at or above the top harness slots – this will allow you to remove both straps from their shoulders easily.
tep 2. Lower headrest all way down until there is some slack and lift up on each side to make them loose enough, reach under where they meet behind their back and pinch together two sides of fabric-covered padding (harness release) while unclipping simultaneously. This should release the harness from the back of the Evenflo car seat.
Step 3. Remove both straps easily then lower the headrest again until it clicks in place before lifting up on either side slightly so there is little slack in the shoulder belt.
Step 4. Now raise armrests by squeezing the center section and pushing up firmly, then push the armrest down and insert two arms into the seat belt guides. This will be easier if you have another person to help.